Introduction to Aluminum

We offer a complete Aluminum CNC machining service and can produce complex Aluminum parts with 13 different types of Aluminum.

Aluminum parts are great for applications that require high strength, corrosion resistance, heat tolerance, low weight, electrical conductivity, and overall versatility.
With our Aluminum CNC machining services, you can apply up to 13 different post-processing/surface finishing options, including bead blasting, anodizing types II and III, powder coating and laser engraving.

We offer 13 different types of Aluminum: Aluminum 6061-T6, Aluminum 7075-T6, Aluminum 6082, Aluminum 5083, Aluminum 6063, Aluminum 5052, Aluminum 2024, Aluminum 7050, Aluminum MIC6, Aluminum 2017, Aluminum A380 and Aluminum 2014.

Available Aluminum Subtypes

Here’s a small selection of the CNC machined prototypes and end-use parts we’ve produced for our customers.
Standards
Yield Strength
Elongation at Break
Hardness
Density
Maximum Temp
Aluminum 6061-T6
35,000 PSI
12.50%
Brinell 95
2.768 g/㎤ 0.1 lbs / cu. in.
1080° F
Aluminum 7075-T6
68,000 psi
11%
Rockwell B86
2.768 g/㎤ 0.1 lbs / cu. in
380° F

Finishing Options for Aluminum

We offer a complete Aluminum CNC machining service and can produce complex Aluminum parts with 13 different types of Aluminum.
Name
Description
Materials
Color
Texture
Link
As Machined
As Machined

As machined, parts have minor visible tool marks and a surface roughness (Ra) of 1.6-3.2 µm.

Materials:
All materials
Color:
n/a
Texture:
Stain

Bead Blasting
Bead Blasting

Bead blasting is a cold treatment process used to remove old paint films with a thickness of not less than 2mm. It is widely used to improve the mechanical strength of parts, as well as wear resistance, fatigue resistance and corrosion resistance.

Materials:
Aluminum
Color:
n/a
Texture:
Matte
/

Sand Blasting
Sand Blasting

Sand blasting is to make the surface of parts for uniform matte treatment, according to the requirements of different sizes of sand can be sprayed, such as aluminum can spray #80-220 fine sand.

Materials:
All Materials
Color:
n/a
Texture:
n/a

Painting
Painting

Painting can make the monotonous product look more beautiful after being sprayed with various colors, and at the same time, it can prolong the life and service life of the product because of an extra layer of protection.

Materials:
Aluminum
Color:
n/a
Texture:
Gloss, semi-gloss, flat, metallic, textured
/

Anodizing
Anodizing

Anodizing is an electrochemical process that converts the metal surface into a decorative, durable, corrosion-resistant, anodic oxide finish.

Materials:
Aluminum
Color:
n/a
Texture:
Smooth, matte finish

Plating
Plating

Plating is a process that is often used in CNC machining to add a protective or decorative layer to the surface of a component.

Materials:
Aluminum, Steel, Stainless Steel, Bron, Copper, Brassze, Iron
Color:
n/a
Texture:
Smooth, glossy finish

Chroming
Chroming

Chroming process in CNC Surface Finishing is a metal finishing process that uses a chemical bath to deposit a thin layer of chromium onto the surface of a metal object.

Materials:
Aluminum
Color:
n/a
Texture:
n/a

Chromate Conversion
Chromate Conversion

A more environmentally friendly and efficient alternative to preparing chromate conversion using safer raw materials. The chromate conversion process can be used for oxidation, corrosion protection and modification of metal surfaces to improve the durability and performance of parts

Materials:
Aluminum
Color:
n/a
Texture:
n/a
/

Alodine
Alodine

Alodine is a chemical surface finishing process used to produce a protective coating on aluminum and its alloys. It is also known as chemical film, or chromate conversion.

Materials:
Aluminum
Color:
n/a
Texture:
n/a

Nickel Plated
Nickel Plated

A layer of nickel is plated on the surface of the material to improve the corrosion resistance of the material and have excellent polishing performance.

Materials:
All Materials
Color:
n/a
Texture:
n/a
/

Laser Engraving
Laser Engraving

Laser engraving uses laser to engraving the logo or character logo you need onto your component.

Materials:
All materials
Color:
n/a
Texture:
n/a

Brushing 
Brushing 

The result of brushing is a unidirectional satin finish that is achieved by polishing the metal with grit.

Materials:
All materials
Color:
n/a
Texture:
Satin

Silk Screen
Silk Screen

By silk screen printing, the ink is adhered to the products surface allowing it to be printed in a variety of colors at the same time, resulting rich and gorgeous effect.

Materials:
All materials
Color:
n/a
Texture:
n/a

E-coating
E-coating

E-coating is a CNC Surface Finishing process that uses electrochemical methods to deposit a protective coating onto metal parts.

Materials:
Aluminum, Zinc, Steel, Stainless Steel, Titanium, Iron
Color:
n/a
Texture:
n/a

Powder Coating
Powder Coating

Powder coating is a process used to coat metal parts with a protective and decorative layer of paint. It is often used for applications such as automotive, marine, and industrial part.

Materials:
All materials
Color:
n/a
Texture:
Glossy

Passivate
Passivate

The passivation process can help to extend the life of the CNC surface, which can increase the longevity of the machine.

Materials:
Aluminum, Steel
Color:
n/a
Texture:
n/a

Smooth Polishing
Smooth Polishing

Smooth polishing is to removes the machining marks from the surface of the workpiece, but there is no mirror effect.

Materials:
Aluminum, Steel, Stainless Steel, Bron, Copper, Brassze, Iron
Color:
n/a
Texture:
Smooth, glossy finish

Mirror Polishing
Mirror Polishing

Mirror polishing is a surface finishing process that can create a highly reflective, mirror-like finish on metal parts.

Materials:
Aluminum, Steel, Stainless Steel, Bron, Copper, Brassze, Iron
Color:
n/a
Texture:
Smooth, glossy finish

Electrolytic Polishing
Electrolytic Polishing

A technology that uses a metal workpiece as an anode and performs electrolysis in a suitable electrolyte to selectively remove its rough surface and improve the surface finish.

Materials:
Aluminum, Stainless Steel
Color:
n/a
Texture:
Smooth, glossy finish
/

Black Oxide
Black Oxide

Black oxide provides corrosion protection, improved electrical conductivity, and improved wear resistance, making it a popular choice for CNC surface finishing.

Materials:
Aluminum
Color:
n/a
Texture:
Smooth, matte finish
Let's Start a New Project Today
Index
X